|Home||» Products||» Hydrazine Hydrate||» Hydrazine Hydrate|
Hydrazine hydrate is widely used as a reducing agent or an intermediate of synthesis in various industrial sectors like water treatment (effluents, industrial boilers), chemical treatment process (metals, mine extraction) or active ingredients synthesis (pharmaceuticals and agrochemicals).
Hydrazine hydrate is marketed as a water-based solution at different hydrazine concentration.
Hydrazine Hydrate 80% is a powerful reducing agent and is marketed in various concentrations. We supply Hydrazine Hydrate 80% and Hydrazine Hydrate 100 % concentration. Hydrazine Hydrate 80% chemical finds itself useful in fields of treatment processes and
We are engaged in offering a wide range of Hydrazine Hydrate that is known for purity. This hydrate is appreciated for its few mineral residues, low total organic carbon content, low chloride content and metallic impurities. Our range of hydrate is widely applicable in photography, water treatment, agro chemistry, pharmaceutical products and chemicals.
Table 1 Requirement for HYDRAZINE HYDRATE
|SI no||Characteristic||Requirement||Method of Test, Ref to clause no in Annex A|
|i)||Purity (as hydrazine hydrated), percent by mass, Min|| |
Relative density, 20o C/20o C, Min
|1.05||IS: 3025 (Part 12)- 1983*|
pH of 1 percent solution at 20o C, Min
|10.5||IS: 3025 (Part 11)- 1983+|
|iv)||Boiling range|| |
115 to 119o C
|IS : 5298-1983+|
|v)||Colour ,hazen units, Max||10||IS: 3025 (Part 4)- 1983|
|vi)||Residue on evaporation, percent by mass, Max||0.01||10 of IS : 3025-1964II|
|vii)||Ash contact ,g/100ml, Max||0.003||11 of IS : 3025-1964II|
|viii)||Ammonia content (as NH3)Max, percent by mass||0.3||5 of IS : 2488 (part 4) -1974|
|ix)||Iron (as Fs), ppm, Max||5 ||32 of IS : 3025-1964II|
|x)||Copper (as Cu),ppm, Max||5 ||36 of IS : 3025-1964II|
|xi)||Silica (as Sio2),ppm ,Max||5 ||30 of IS : 3025-1964II|
|xii)||Chloride (as C1), ppm, Max||5 ||24 of IS : 3025-1964II|
|xiii)||Sulphates (as So4),ppm, Max||5 ||21 of IS : 3025-1964II|
|xiv)||Water insoluble matter , percent by mass, Max||0.005||Appendix B|
|*Methods of sampling and test (physical and chemical)for water and waste water : Part 1 2 Density (first revision).|
|+Method of sampling and test (physical and chemical) for water and waste water: Part 11 pH value (first revision).|
|+Method fore determination of distillation range and of distillation yield (first revision).|
|+ Methods of sampling and test (physical and chemical)for water and waste water : Part 4 colour (first revision).|
|+ Methods of sampling and test (physical and chemical) for used in industry.|
|+ Methods of sampling and test for industrial effluents, part 4.|
SWASTIK CHEMICALS All Rights Reserved.